Please use this identifier to cite or link to this item: http://148.72.244.84:8080/xmlui/handle/xmlui/13394
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAli Sabah AL-Amili-
dc.date.accessioned2024-03-27T07:47:16Z-
dc.date.available2024-03-27T07:47:16Z-
dc.date.issued2013-03-01-
dc.identifier.citationhttps://djes.info/index.php/djes/article/view/535en_US
dc.identifier.issn1999-8716-
dc.identifier.urihttp://148.72.244.84:8080/xmlui/handle/xmlui/13394-
dc.description.abstractIn this work aims at studying the influence of steel plate on the deflection of self- compacted reinforced concrete beams was investigated experimentally in this study to know the flexural behavior of these beams. Eight simply supported reinforced concrete beam were tested under the action of two point loads .The deflections of the beams with and without plate are measured. The steel plates of thickness (3 mm) with dimensions ( 170 × 350 mm) were used. These plates were sticked on the concrete beams using epoxy. The steel plate inside the beam was sticked with and without epoxy (epoxy type EP), while the beams were taken with and without opening (10 mm diameter). The results show that the plate increased the capacity of the beam by increased the value of failure load. Hence, the beam with internal plate with epoxy increased the failure load by 34.2% than beam without plate , and 24.6% than beam with internal plate without epoxy , and 19.7% than beam with external plate with epoxy .en_US
dc.language.isoenen_US
dc.publisherUniversity of Diyala – College of Engineeringen_US
dc.titleThe Effect of Steel Plate on the Deflection of Self Reinforced Concrete Beam with and Without Openingen_US
dc.typeArticleen_US
Appears in Collections:مجلة ديالى للعلوم الهندسية / Diyala Journal of Engineering Sciences (DJES)

Files in This Item:
File Description SizeFormat 
535-4.pdf1.38 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.