Please use this identifier to cite or link to this item: http://148.72.244.84:8080/xmlui/handle/xmlui/13405
Full metadata record
DC FieldValueLanguage
dc.contributor.authorEmad Yassin Khudhair-
dc.date.accessioned2024-03-27T08:11:42Z-
dc.date.available2024-03-27T08:11:42Z-
dc.date.issued2013-06-01-
dc.identifier.citationhttps://djes.info/index.php/djes/article/view/521en_US
dc.identifier.issn1999-8716-
dc.identifier.urihttp://148.72.244.84:8080/xmlui/handle/xmlui/13405-
dc.description.abstractIn resent years several attempts were undertaken to repair damaged reinforced concrete structures. Studies on the effectiveness of repaired and strengthened reinforced concrete elements which fail primarily due to formation of major flexural cracks are same what limited for normal strength concrete (NSC) and very limited for high strength concrete (HSC). The overall objective of the present work is to investigate the strength and deformation characteristics in flexure of reinforced HSC and NSC beams repaired with either with concrete alone or with fiber reinforced concrete or with Welded Wire Mesh (W.W.M). From the results obtained, it was found that the beams were adequately repaired and the general mode of failure was flexural. The repaired beams had higher strength than the original beams. All repaired beams exhibited significant decrease in deflection than the original beams.en_US
dc.language.isoenen_US
dc.publisherUniversity of Diyala – College of Engineeringen_US
dc.subjectBeam, Concrete, Fiber Reinforced Concrete, Flexural, High Strength Concrete, Epair, Welded Wire Meshen_US
dc.titleRepaired Reinforced Concrete Beams with Normal and High Strength Concreteen_US
dc.typeArticleen_US
Appears in Collections:مجلة ديالى للعلوم الهندسية / Diyala Journal of Engineering Sciences (DJES)

Files in This Item:
File Description SizeFormat 
بحث 3 عماد ياسين.pdf171.54 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.