Please use this identifier to cite or link to this item:
http://148.72.244.84:8080/xmlui/handle/xmlui/4581Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Alyaa H .Abdalsalam | - |
| dc.contributor.author | OlfatA.Mahmood | - |
| dc.contributor.author | Gaid K.Salman | - |
| dc.date.accessioned | 2023-10-18T06:37:45Z | - |
| dc.date.available | 2023-10-18T06:37:45Z | - |
| dc.date.issued | 2017 | - |
| dc.identifier.citation | http://dx.doi.org/10.24237/djps.1301.106B | en_US |
| dc.identifier.issn | 2222-8373 | - |
| dc.identifier.uri | http://148.72.244.84:8080/xmlui/handle/xmlui/4581 | - |
| dc.description.abstract | In this research, it has been investigated the effect of addition High performance polymer Polytetrafluroethylene (PTFE) on the Ultra-high molecular weight polyethylene (UHMWPE) mechanical and physical properties. It has been prepared three types of blends (95:5, 90:10 and 85:15) of UHMWPE: PTFE by compression method. Stress-Strain curves of polymer blends have been showed that higher ultimate strength and Young modulus were at 95:5 and decreased gradually as wt. % PTFE increased. FTIR inspection has been also accomplished. Finally SEM results showed incompatibility between the polymers with presence of boundaries between the binary polymers phases. | en_US |
| dc.description.sponsorship | https://djps.uodiyala.edu.iq/ | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | university of Diyala | en_US |
| dc.subject | Polymer blend, UHMWPE, PTFE, Mechanical properties | en_US |
| dc.title | Study the Morphological and Mechanical Properties of Ultra-high Molecular weight polyethylene UHMWPE: Polytetrafluroethylene PTFE binary blends | en_US |
| dc.type | Article | en_US |
| Appears in Collections: | مجلة ديالى للعلوم الاكاديمية / Academic Science Journal (Acad. Sci. J.) | |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.