Please use this identifier to cite or link to this item: http://148.72.244.84:8080/xmlui/handle/xmlui/4789
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAmmar Ayesh Habeeb-
dc.date.accessioned2023-10-18T13:51:29Z-
dc.date.available2023-10-18T13:51:29Z-
dc.date.issued2018-
dc.identifier.citationhttp://dx.doi.org/10.24237/djps.1404.456Aen_US
dc.identifier.issn2222-8373-
dc.identifier.urihttp://148.72.244.84:8080/xmlui/handle/xmlui/4789-
dc.description.abstractZinc oxide transparent conductive films were deposited on glass substrates at 400 C using chemical spray pyrolysis method. The effect of annealing of ZnO samples with the increase in thickness has been studied. The X-ray diffraction results indicate that the polycrystalline films exhibited a distinguished orientation along (002) direction with a hexagonal wurtzite phase type. It is found that good crystallinity is obtained in the samples annealed at 500 C. All films showed an average transmittance of about 85% measured by UV/VIS/NIR spectrophotometer. The grain size and lattice parameters of films were computed. The grain size increases as thickness increases. Hence the values of the optical gap energy (Eg) are found to be in the range of 3.238 to 3.273 eV without annealing and in the range of 3.252 to 3.280 eV with annealing when the thickness varies from 355 to 445 nm.en_US
dc.description.sponsorshiphttps://djps.uodiyala.edu.iq/en_US
dc.language.isoenen_US
dc.publisheruniversity of Diyalaen_US
dc.subjectZinc Oxide Film, Strain, Spray pyrolysis, XRDen_US
dc.titleInfluence of Thickness and Annealing on Some Physical Properties of Zinc Oxide Filmsen_US
dc.typeArticleen_US
Appears in Collections:مجلة ديالى للعلوم الاكاديمية / Academic Science Journal (Acad. Sci. J.)

Files in This Item:
File Description SizeFormat 
9e-P1(453).pdf653.36 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.