Abstract:
A wonderful unique research developments in modeling surface roughness and optimization of the predominant parameters to get a surface finish of desired level since only suitable selection of cutting parameters can get a better surface finish, so the objective of this work is to study the milling process parameters which include tool diameter, feed rate, spindle speed, and depth of cut resulting in optimal values of the surface roughness during machining AL-alloy 7024. The machining operation implemented on XK7124 3-axis CNC milling machine. The effects of the selected parameters on the chosen characteristics have been accomplished using Taguchi’s parameter design approach. The parameters considered are – depth of cut with two levels (0.2, 0.5 mm), tool diameter with two levels (6, 8 mm), spindle speed with two levels (1000, 2500 rpm), and finally feed rate with two levels (200, 500 mm/min). Analysis of the results showed that the optimal settings for low values of surface roughness are large tool diameter (8 mm), high spindle speed (2500 r.p.m), low feed rate (200 mm/min) and high depth of cut (0.5 mm). Response Table for mean of surface roughness showed that tool diameter has the most effected factors (rank one) followed by feed rate (rank two) then depth of cut which is the third effected factors and finally spindle speed with the less effected factors of surface roughness (rank four).
